12
Chapter 1 Using the Phone Link Application to Pair Your Handheld with a Mobile Phone
To configure a GPRS high-speed wireless data service connection for your phone:
1. After completing step 11 in the earlier section “Configuring Bluetooth settings
for your phone connection,” tap Next on the Network Service Setup screen.
2. Tap Yes when asked if you subscribe to a high-speed data service.
3. Tap Next.
4. Tap the Select the area… pick list and select your mobile phone carrier’s
location.
5. Tap the Select your carrier pick list and select your mobile phone carrier.
If your region or carrier is not listed, you cannot create a connection to your
phone at this time. We periodically update the list of supported regions and
carriers. Please check back at a later date and repeat the steps in this procedure
to see if new regions and carriers are supported. See “Downloading phone files
from the Internet to your handheld” earlier in this chapter for instructions on
downloading an updated list of carriers to your handheld.
To Next Page
Loading...
Need help?
General
