ENGLISHDEUTSCH
5 TUBE REPLACEMENT & MAINTENANCE:
THESE ARE SOME BASIC RULES TO MAINTAIN YOUR FAT50 IN PERFECT WORKING ORDER:
• A quick move from cold to warm locations may result in condensation inside the amp. Let the amp warm up to
room temperature before switching it on.
• Make sure the equipment connected to your FAT50 is in perfect order.
• Do not block the air vents and ensure proper ventilation.
• Keep your FAT50 from heat, dust, and moisture..
• Make sure the impedance of your loudspeaker(s) matches the output impedance of your FAT50. Do not connect
equipment with inappropriate output levels (e.g. power amps).
• Always check if the required mains voltage is available. If in doubt, ask the house technician. No DIY repairs,
please! Internal fuses should always be replaced by qualified personnel
To Next Page
Loading...
