Need help?Do you have a question about the Palmer FAT50 and is the answer not in the manual?
General| Tubes (Preamp) | 3 x 12AX7 |
|---|---|
| Power Output | 50 Watts |
| Speaker Configuration | 1 x 12" |
| Channels | 2 |
| Controls | Bass, Middle, Treble, Presence |
| Inputs | 1 x 1/4" Instrument Input |
| Outputs | 1 x Speaker Output |
| Impedance | 8 Ohms |
Covers essential safety for apparatus usage, water, flame, dust, ventilation, grounding, and cord care.
Details the CLEAN channel's tones from organic to crunchy, and the DRIVE channel's powerful, saturated sound.
Details front panel controls: INPUT, CLEAN VOLUME, BRIGHT/NORMAL, GAIN, DRIVE, BASS, MID, TREBLE.
Details front panel controls: DRIVE VOLUME, PRESENCE, CHANNEL SELECT, REVERB, MASTER, PILOT LAMP, POWER, STANDBY.
Details rear panel connectors: MAINS IN, FUSES, FOOTSWITCH, and FX-LOOP (FX SEND).
Details rear panel: FX-RETURN, DRY/WET, and POWER AMPLIFIER OUTPUTS (8 Ohm and 16 Ohm).
Illustrates wiring configurations for COMBO and HEAD versions of the amplifier.
Explains channel selection, gain function, BRIGHT/NORMAL, reverb control, and master volume.
Details FX loop operation for parallel/series effects, level setting, and connecting external effects.
Guides on identifying tube issues like microphonics, hum, loss of response, and potential causes.
Outlines safe tube replacement, emphasizing qualified personnel, capacitor discharge, and bias adjustment.
Provides tips for extending tube life, such as using standby, avoiding vibration, and basic maintenance rules.
Addresses problems with no signal, power indicator not lighting, or fuse blowing issues.
Covers troubleshooting ringing noises, squeals from microphonic tubes, and FX loop sound issues.
Details input/output impedance, sensitivity, tube types (preamp, power amp), and loudspeaker specifications.
Lists mains voltage, power consumption, fuses, operating environment, and physical dimensions/weight.
Provides visual examples of various control knob settings for different sound configurations.
Certifies compliance with EU directives for electromagnetic compatibility and low voltage standards.
Details warranty period, coverage, transferability, and exclusions for Adam Hall branded products.
Explains how to request warranty service and outlines customer legal rights and advice.
Instructs on proper disposal of electrical waste to prevent environmental harm and promote recycling.
Explains product recycling and proper disposal of batteries and accumulators for environmental protection.
To Next Page
