Panache VT300 - Page 12

VT300 User Manual
9
Specification of some part elements
1) Power switch
Press “0” to turn off power and press “1” to turn on power supply.
2) Feed Button
Feed paper: When it’s not in the alarm status, push the button to feed paper. Push
the button continuously to feed the long distance.
3) Power LED
It indicates the power status.
4) Paper LED
It detects the status of paper, such as paper near end and paper out. See more details
in ”3.2 Specification of Indicated light and beeper”.
5) Error LED
If there is an abnormal phenomenon and error LED flashing, it means the printer is in
the wrong status. Please turn off the power immediately.
6) Paper guide
Paper guide can change the position to adapt to different paper width.
VT300 storehouse has 4 paper guide slot.
Paper guide slot 1/4 adapt to
0
1
80


mm/
0
1
58


mm print paper respectively.
Warnings：
Paper guide is essential to adjusting the paper width. Please keep it properly.