4 Printer Packing
4.1 Open packing
When opening the package, according to the packing list to check if items are missing
or damaged, if so, please contact the dealer or manufacturer.
4.2 Choice installation site and direction of printer
1) The printer should install at a flat and steady place. It’s recommend that install
the printer at horizontal line. The angle of inclination should not exceed ±
10°(paper feed direction) if tilt install printer, it does not allow to tilt by other
direction
2) Keep printer far away from source of water
3) Avoid the printer on place where it is vibration and shock
4) Ensure printer ground connect is safe
5) When the printer is at operation and maintenance, it is recommended to retain
the enough space to ensure the printer can work in reliability and ease of
operation
4.3 Connect the printer power adapter
1.Turn off the printer power.
2.Plug in the cable connector of the AC adapter to the power connector at the rear
of the printer.
3.Connect the Power cord to the inlet of AC adapter, and insert the Power cord
plug into a suitable wall outlet.
To Next Page
Loading...