Panache VT300 - 5.3 Cash Drawer interface signal

VT300 User Manual
20
5.3 Cash Drawer interface signal
Electrical characteristics
 Driving voltage：DC 24 V
 Driving current：maximum 0.8 A ( In 510 ms)
 Drawer check signal：“L” = 0～0.5 V “H” = 3～5 V
 Interface signal definition
Pin No.
Signal
Function
1
FG
Frame Ground
2
DRAWER 1
Drawer kick-out drive signal
1
3
DRSW
Drawer open/close signal
4
VDR
Drawer driving source
5
DRAWER 2
Drawer kick-out drive signal
2
6
GND
GND
Note：
 Strictly prohibit to hot plug the plug
 When arranging the line of communication, you have to avoid paralleling with the
strong current
 You have to use the shielded communication line