5
4 Disassembly and Assembly Instructions
4.1. How to Disassemble the Blade.
Ref. No. 1A Procedure 1A Removal of blade.
WARNING:
To reduce the risk of injury, always remove battery pack before
removing/installing the blade.
1. Lift up the blade attach/remove lever.
2. Pull out the blade.
CAUTION:
Be careful to avoid cutting your hands on the blade.
Ref. No. 1B Procedure 1A → 1B Removal of base.
1. Use the provided hex wrench to loosen the base fixing screw.
NOTE:
Keep the hex wrench in the storage slot on the tool’s body when not
using it.
2. Remove the hex bolt and base.
To Next Page
Loading...
