Panasonic 96NKX-UT248

Questions and Answers:

J
jessicacoxSep 12, 2025
Why I cannot make calls on my Panasonic 96NKX-UT248 IP Phone?
- K
  kcrossSep 12, 2025
  There are several reasons why you might not be able to make calls: * Your phone system/service may have disabled service for your unit; consult your administrator or dealer. * You may have entered the phone number incorrectly; confirm you've entered it correctly and consult your administrator or dealer. * The unit may be downloading a firmware update; wait for the update to finish and then try making a call. * The phonebook list may be being imported or exported; wait a few minutes for the operation to complete and confirm with your administrator or dealer.
D
Dorothy RussellSep 10, 2025
What to do if my Panasonic 96NKX-UT248 is not performing properly?
- M
  Michelle SanchezSep 10, 2025
  If your unit isn't performing properly: * Check all cable and cord connections. * Consult your administrator to confirm that your connection settings are correct. If the problem continues, consult your dealer. * Restart the unit.
C
chloecoxSep 9, 2025
What to do if my Panasonic IP Phone display is blank?
- R
  rebecca19Sep 9, 2025
  If the display is blank, ensure the device supplying PoE is receiving power and the Ethernet cable is properly connected. If using an AC adapter, check that it's connected and also receiving power.
J
Justin HenrySep 8, 2025
What do error codes 11001–11006 mean on a Panasonic 96NKX-UT248?
- D
  Danielle HodgeSep 8, 2025
  Error codes 11001–11006 on a Panasonic IP Phone indicate a device error. No solution.
B
bgonzalesAug 23, 2025
What to do if I cannot cancel the display lock on Panasonic Telephone?
- L
  lisalongAug 23, 2025
  If you cannot cancel the display lock on your Panasonic Telephone, it may be due to an incorrect PIN. Consult your administrator or dealer.
A
andersenerinSep 6, 2025
What does error code 10001 mean on a Panasonic 96NKX-UT248?
- R
  Robert GoodSep 6, 2025
  Error code 10001 on a Panasonic IP Phone indicates a MAC address error. No solution.
C
Cynthia BaileySep 5, 2025
What does error code 90001 mean on a Panasonic 96NKX-UT248?
- S
  singletondavidSep 5, 2025
  Error code 90001 on a Panasonic IP Phone indicates a transmission error or that the unit is not registered. Check your network settings and confirm that the settings are correct for registration to the SIP server.
C
Claire GonzalezSep 3, 2025
What to do if I cannot make a call on my Panasonic 96NKX-UT248 IP Phone?
- L
  Laura WilkinsSep 4, 2025
  If you're unable to make calls on your Panasonic IP Phone, first check the VoIP status in the Web user interface to confirm that each line is registered properly. Also, verify that the SIP server address, URLs of the configuration files, and encryption key are correct. Finally, check the firewall and port forwarding settings on the router.
E
Eric BakerSep 2, 2025
What to do if my Panasonic IP Phone does not ring?
- G
  Gary RobertsonSep 2, 2025
  If your Panasonic IP Phone isn't ringing, check the VoIP status in the Web user interface to ensure each line is registered properly. Also, verify that the SIP server address, URLs of the configuration files, and encryption key are correct. Check the firewall and port forwarding settings on the router. Ensure that [Do Not Disturb] and [Unconditional (Enable Call Forward)] are set to [No], and [Block Anonymous Call] is also disabled. Finally, confirm that these settings are not controlled by your phone system.
S
Stephanie SmithSep 1, 2025
What to do if my Panasonic 96NKX-UT248 will not start up correctly?
- T
  Tasha WillisSep 2, 2025
  If your Panasonic IP Phone doesn't start up correctly, the Web user interface settings or configuration file settings may be incorrect. To initialize the settings, follow these steps: 1. Press Setup. 2. Press [#][1][3][6]. 3. Select "IP Reset" using the navigation keys and press [ENTER]. 4. Select "Yes" using the navigation keys and press [ENTER]. 5. Select "Yes" again and press [ENTER]. The unit will restart automatically after performing IP Reset.