Panasonic A Series - Fan Motor and FC Assembly

6.7 Disassemble FAN MOTOR AS.
6.8 Disassemble FC
④ Take SENSOR PFC and
PCC out of the hook.
⑤
Open 2 hook at 2 sides, take INS DAMPER out
PCC
sensor
PFC
sensor
INS
DAMPER
COVER DAMPER
⑥ Remove the tape, separate INS DAMPER PCT/ PCB & TWIN ELECTRIC DAMPER AS.
INS
DAMPER PCT
INS DAMPER PCB
TWIN
ELECTRIC DAMPER AS
① Remove the tape of
connector of FAN MOTOR
② Taking out FAN MOTOR by
using two hands push into the
hook as show in fingure.
Fan may be installed in wrong
side.
Be noted that stamping side has
to be upside.
stamped side
① Remove 2 screw of HINGE
CENTER then take FC out
11