6.9 Disassemble COVER COIL AS.
6.10 Disassemble DEFROST HEATER, SENSOR DEFROST, TEMP. FUSE
① Position of COVER COIL
AS. in FC
Remove screw
④ COVER COIL FRONT
③
Use two hands to push on the
under hook to take COVER
COIL AS out.
⑤ Press on the above hook to
separate COVER COIL BACK
⑥ Press on the hook as in the
picture to separate INS COVER
COIL
hook
① On the top of FC take out 2 plastic cover on the right and left.
② Pull the electric wire out, and
cut the tube bending.
Take 4 connectors out.
④
Split 2 wire of DEFROST
HEATER then take DEFROST
⑤ Cut the tube bending of
SENSOR DEFROST then take
SENSOR
To Next Page
Loading...
