Panasonic AG-AC160A - [RECORDING SETUP] Screen

89
Menu
[RECORDING SETUP] screen
Item
Display
mode
Description of settings
[HD/SD MODE] <CAMERA>
Switches the mode AVCHD/DV.
[AVCHD], [DV]
•
If the [TURN POWER OFF] message is displayed, switch the camera OFF
and then ON again. Switching the camera ON/OFF switches the mode.
[REC FORMAT] <CAMERA>

AVCHD mode
Selects the recording format. (Page 14)
•
[PH 1080/24P] and [PH 720/24P] are for native recording.
When [SYSTEM FREQ] = [59.94Hz]
[PS 1080/60P], [PH 1080/60i], [PH 1080/30P], [PH 1080/24P],
[PH 720/60P], [PH 720/30P], [PH 720/24P], [PM 720/60P], [HA 1080/60i],
[HE 1080/60i]
When [SYSTEM FREQ] = [50Hz]
[PS 1080/50P], [PH 1080/50i], [PH 1080/25P], [PH 720/50P], [PH 720/25P],
[PM 720/50P], [HA 1080/50i], [HE 1080/50i]

DV mode
Selects the recording format. (Page 14)
When [SYSTEM FREQ] = [59.94Hz]
[DV 480/60i], [DV 480/30P], [DV 480/24P]
When [SYSTEM FREQ] = [50Hz]
[DV 576/50i], [DV 576/25P]
[ASPECT
CONV]
<CAMERA>
(DV mode
only)
Selects aspect ratio for DV mode recording.
[SIDE CROP]: Records in 4:3. Crops the left and right edges.
[LETTER BOX]: Records in 16:9. Adds black bands at the top and bottom of
the screen.
[SQUEEZE]: Records with horizontal compression of picture.
[PREREC
MODE]
<CAMERA> Sets the pre recording to ON or OFF.
[ON]: Enables the pre-rec function.
[OFF]: Disables the pre-rec function.
•
[TCG] is set to [FREE RUN].
•
The INTERVAL REC setting will be released.
[SIMUL REC] <CAMERA> Records the same images to both memory card slots. (Page 32)
[ON]: Enables the simul recording.
[OFF]: Enables the normal recording.
[RELAY REC] <CAMERA> [ON]: Enables the relay recording. When the memory card used for
recording has no remaining space, recording continues on another
memory card if the memory card that can be used for recording is
inserted in another memory card slot.
[OFF]: Relay recording is not performed. Recording stops when the selected
memory card has no remaining space.
is the factory default mode.