To Next PageTo Next PageWhat to do if my Panasonic AG-AC90EJ won't turn on or stay on?
First, ensure the battery is sufficiently charged by charging it again. If the operating time remains too short even after a full charge, the battery may be worn out and require replacement.
How to fix Panasonic Camcorder not detected by PC via USB cable?
Try these steps: re-insert the SD card into the unit and reconnect the supplied USB cable; select another USB terminal on the PC; check the operating environment; connect the supplied USB cable again after restarting the PC and turning on the unit again.
Why is my Panasonic AG-AC90EJ not working even though it's turned on?
Try removing the battery or AC adapter, wait about 1 minute, and then reconnect it. Wait another minute before turning the unit on again. Be aware that performing this action while the media is being accessed may damage the data on the media. If normal operation isn't restored, detach the power connected and consult the dealer from whom you purchased this unit.
How to fix a Panasonic AG-AC90EJ when images are not seen on TV or are squeezed horizontally?
Select the channel on your TV that matches the input used for the connection. Also, change the setting of the unit depending on the cable connecting to the TV.
What to do if my Panasonic AG-AC90EJ Camcorder displays “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
This error indicates the unit has automatically detected an error. Try restarting the unit by turning it off and then on again. If the error repeatedly appears after restarting, repair is needed.
Why does my Panasonic AG-AC90EJ arbitrarily stop recording?
Ensure you are using an SD card that is suitable for motion picture recording. Also, if the recordable time has shortened due to deterioration of the data writing speed or repeated recording and deletion, format the SD card using the unit.
Why is the SD card not recognized in my Panasonic Camcorder?
If the SD card was formatted on a PC, use the camcorder to format the SD card.
How to fix color or brightness changes and horizontal bars on my Panasonic Camcorder?
Color or brightness changes, or horizontal bars, can occur when recording under fluorescent, mercury, or sodium light. Try recording in Intelligent Auto Mode. Alternatively, set the shutter speed to 1/60 in areas with a 60 Hz power supply or 1/100 in 50 Hz areas.
Why isn't the Auto Focus function working on my Panasonic AG-AC90EJ Camcorder?
Try switching to Intelligent Auto Mode. If you're recording a scene that's difficult to focus on in Auto Focus Mode, use Manual Focus Mode to adjust the focus.
What to do if my Panasonic AG-AC90EJ scenes/still pictures cannot be deleted?
Release the protect setting. If the scenes/still pictures are unnecessary and thumbnails are displayed, format the media to erase the data. Be aware that formatting will erase all data on the media, and it cannot be recovered. Back up important data on a PC or disc.
General| Sensor Type | 3MOS |
|---|---|
| Lens | Leica Dicomar |
| Optical Zoom | 12x |
| Recording Media | SD/SDHC/SDXC card |
| Audio Recording | Dolby Digital (2ch) |
| HDMI Output | Yes |
| USB Interface | USB 2.0 |
| Weight (body only) | 1.5 kg |
| Type | Camcorder |
| Aperture | F1.5 to F2.8 |
| Image Stabilization | Yes |
| Recording Format | AVCHD |
| Video Resolution | 1920 x 1080 |
| Microphone | Built-in Stereo |
| LCD Screen Size | 3.5" |
| Viewfinder | Color |
| Battery | Lithium-ion battery |
| Outputs | HDMI, AV |
| Sensor Size | 1/4.1 inch |
| Effective Pixels | 2.19 MP |
