What to do if my Panasonic AG-AC90AP Camcorder is on but not working?
Remove the battery or AC adapter, wait approximately one minute, and then reconnect it. After another minute, turn the unit on again. Note that doing this while the media is being accessed could damage the data. If normal operation isn't restored, detach the power and consult the dealer from whom you purchased the unit.
What to do if Panasonic AG-AC90AP images are not displayed correctly on TV?
Consult your TV's operating instructions to select the channel matching the input used for the connection. Adjust the unit's settings according to the cable connecting it to the TV.
Why is my Panasonic AG-AC90AP Camcorder not detected by PC via USB?
Re-insert the SD card into the unit, then reconnect the supplied USB cable. Try another USB terminal on the PC. Check the operating environment. Reconnect the supplied USB cable after restarting the PC and turning on the unit again.
What to do if my Panasonic AG-AC90AP displays 'Error occurred'?
This message indicates that the unit has detected an error. Try restarting the unit by turning it off and then on again. If the message persists even after restarting, the unit needs repair. Detach the power connected, and consult the dealer from whom you purchased the unit. Do not attempt to repair the unit yourself.
Why does my Panasonic AG-AC90AP arbitrarily stop recording?
Ensure you are using an SD card suitable for motion picture recording. The recordable time might be reduced due to the data writing speed deteriorating or repeated recording and deletion. Try formatting the SD card using the unit.
How to fix Auto Focus on Panasonic Camcorder?
Switch to Intelligent Auto Mode. If you're recording a scene difficult to focus on in Auto Focus Mode, use Manual Focus Mode to adjust the focus.
How to delete scenes or still pictures on Panasonic Camcorder?
Release the protect setting. Scenes or still pictures displayed with thumbnails cannot be deleted. If these scenes or still pictures are not needed, format the media to erase the data. Be aware that formatting will erase all data on the media, and it cannot be recovered. Back up important data on a PC or disc.
Why is function display not showing on my Panasonic AG-AC90AP Camcorder?
[CARD&BATTERY] or [OTHER DISPLAY] of the [SW & DISP SETUP] is [OFF]. Press the COUNTER button to switch the counter display.
Why does my Panasonic Camcorder image change color or flicker?
Color or brightness changes and horizontal bars may appear when recording under fluorescent, mercury, or sodium light; this isn't a malfunction. Record in Intelligent Auto Mode. Set the shutter speed to 1/60 in areas with a 60 Hz power supply frequency, or 1/100 in 50 Hz areas.
Why can't I play back scenes or still pictures on my Panasonic AG-AC90AP?
Any scenes or still pictures where the thumbnails are displayed as cannot be played back.
General| Sensor Type | 3MOS |
|---|---|
| Recording Format | AVCHD |
| Storage Media | SD/SDHC/SDXC Memory Card |
| HDMI Output | Yes |
| Image Sensor Size | 1/4.7-inch |
| Maximum Aperture | f/1.5 - f/2.8 |
| Image Stabilization | Optical Image Stabilization |
| Video Resolution | 1920 x 1080 |
| Frame Rate | 60p/60i/24p |
| Audio Recording | Dolby Digital (2ch) |
| Microphone | Built-in Stereo |
| LCD Screen Size | 3.5 inches |
| Viewfinder | Color LCD |
| USB Port | Yes (USB 2.0) |
| Battery | Lithium-ion Battery |
To Next Page