- 71 -
Resuming the previous playback
If playback of a scene was stopped halfway, the playback can be resumed from where it was
stopped.
If playback of a motion picture is stopped, appears on the thumbnail view of the stopped
scene.
≥ The memorized resume position is canceled if you turn off the unit or change the mode. (The
setting of [RESUME PLAY] does not change.)
Playback scenes by the selected format
Scenes recorded with same recording format are played back continuously.
≥ Change the mode to and touch the play mode select icon.
Then, set [VIDEO/PICTURE] to [VIDEO]. (l 65)
1 Touch the format select icon.
2 Touch [SAME FORMAT].
All the scenes are displayed by touching [ALL].
3 Touch the playback recording format.
The scenes recorded on the recording format selected are
displayed as thumbnails.
4 Touch the scene to be played back.
≥ It will go back to [ALL] display when the recording is started by switching to the recording mode.
≥ It is possible that scenes recorded using other devices may not be displayed in modes other than
[ALL] display.
: [VIDEO SETUP] # [RESUME PLAY] # [ON]
MENU
101010 111111 121212
131313 141414 151515
161616 171717 181818
PH PH PS
PS HA HE
PM SA CS
AG-AC90A-SQT0333_mst.book 71 ページ ２０１４年５月１４日 水曜日 午前１０時３６分
To Next Page
Loading...
