Panasonic AG-AC90AP - Turning the Unit On;Off; Selecting a Mode

- 18 -
Set the power switch to ON while pressing the lock release button B to turn on
the unit.
A The status indicator lights on.
≥ To turn on the unit again after the [ECONOMY (BATT)] or [ECONOMY (AC)] is activated, set the
power switch to OFF once, and then to ON again. (l 107)
Operate the mode switch to change the mode to or .
Preparation
Turning the unit on/off
Preparation
Selecting a mode
Recording Mode (l 30, 31)
Playback Mode (l 65)


To turn off the unit
Set the power switch to OFF while
pressing the lock release button.
The status indicator goes off.

C Mode switch
AG-AC90A-SQT0333_mst.book 18 ページ ２０１４年５月１４日 水曜日 午前１０時３６分