- 101 -
Selects the brightness level of the right-leaning zebra patterns on the screen.
1 Touch [ZEBRA DETECT 2].
≥ Touch [SET].
2 Touch / to adjust settings.
3 Touch [ENTER].
≥ Touch [EXIT] to exit the menu screen.
≥ Zebra 2 can be displayed by pressing the ZEBRA button after setting. (l 62)
Displaying of the luminance level display marker can be switched.
≥ Marker can be displayed by pressing ZEBRA button when set to [ON]. (l 62)
You can check if the image is level while recording motion pictures and still pictures. The function
can also be used to estimate the balance of the composition.
≥ The guidelines do not appear on the images actually recorded.
≥ When Focus Assist is set to on, the following occurs. (l 39)
j The guidelines are not displayed. (these are displayed on the TV when this unit is connected to
TV.)
j The setting cannot be changed.
Display of the range that can be displayed with the common household TV (safety zone) can be
switched.
≥ The safety zone is not displayed on the images that is actually recorded.
Displays/hides the center marker.
[ZEBRA DETECT 2]
[SET]/[OFF]
[MARKER]
[ON]/[OFF]
[GUIDE LINES]
[OFF]/ / /
[SAFETY ZONE]
Aspect ratio Safety zone
[16:9] [16:9 90%]/[4:3]/[14:9]/[1.85:1]/[2:1]/[2.35:1]/
[2.39:1]/[OFF]
[4:3] [4:3 90%]/[4:3]/[OFF]
[CENTER MARKER]
[ON]/[OFF]
AG-AC90A-SQT0333_mst.book 101 ページ ２０１４年５月１４日 水曜日 午前１０時３６分
To Next Page
Loading...
