FOCUS – Set to “A” for Auto Focus
Set to “M” for Manual Focus
FOCUS ASSIST – Pressing this enlarges the center of the
frame allowing easier eye focusing.
USER BUTTONS – You can assign specific features to
each button using the MENU selection SW MODE.
MANUAL-SERVO – Controls the ZOOM lens switch. Set
to MANUAL to zoom by hand and set to SERVO to use
the zoom control on the hand grip or the zoom lever on
the handle.
BARS – Push to select Color Bars.
CH1 SELECT – Set to “INPUT 1”
CH2 SELECT – Set to “INPUT 2”
INPUT 2 – Set to “OFF”
ZEBRA – Set to “OFF”, unless you are familiar
with how to use the ZEBRA setting
To Next Page
Loading...
