• Insert SD card into slot on back of camera and format card according to the
following instructions.
1. Turn camera power switch to OFF.
2. Tilt viewfinder upwards and open the SD Memory Card Slot by sliding the
cover to the left.
3. Fully insert an SD Memory Card into the card slot.
4. Close the SD Memory Card slot cover.
SD Memory Card Slot
SD Memory Card Slot Closed
SD Memory Card Slot Open
Before shooting, you must perform the following:
• Format SD Card according to instructions on the following pages.
These instructions are taken from the HMC-150 Operating Manual which can be
found at www.uncsafilm.net/manuals.
• Reset the TIME CODE to ZERO. Follow the instructions on the next pages.
These instructions are taken from the HMC-150 Operating Manual which can be
found at www.uncsafilm.net/manuals.
To Next Page
Loading...
