Shooting
47
Synchro scan
Set the shutter speed of the synchro scan (used
when shooting a television or computer monitor) in
the setup menus, SCENE FILE screen, SYNCRO
SCAN. (Page 86)
Adjust the shutter speed to match the frequency
of the television or computer monitor to minimize
the horizontal noise that appears when shooting
such subjects.
If the SYNCRO SCAN item is displayed in grey, it
cannot be used with the current recording format.
This function will only operate for preset values
for each recording format, as listed below.
50i/50P mode: 1/50
25P mode: 1/25
•
•
You can change the progressive mode in
the setup menu with REC FORMAT in the
RECORDING SETUP screen. (Page 91)
To Next Page
Loading...
