Playback
67
SD Memory Cards can be formatted, and clip and
SD Memory Card information can be checked.
1
Press the MENU button.
Menu operation (Page 82)
2
Select CARD FUNCTIONS, and push the
Operation lever (or tilt in the
direction).
Format card and check clip and card information (CARD FUNCTIONS)
3
Tilt the Operation lever in the directions
to select item, and push the Operation lever.
CARD FORMAT:
Insert card to be formatted into the camera.
SD Memory Card will be formatted.
Proceeding will erase all data from card.
Select whether or not to format (YES/NO),
and push the Operation lever.
CARD STATUS:
Display SD Memory Card information.
(Next page)
CLIP PROPERTY:
Display information of selected clip.
(Next page)
Tilt the Operation lever in the
directions
to display information from previous or
subsequent clips.
4
Press the MENU button to return to the
thumbnail screen.
•
•
•
CLIP PROTECT:
YES:
Protect selected clips.
(
mark will be displayed.)
• Cancel protection when the protected
clip is selected.
(
mark will disappear.)
Executing a format of the memory card
(see below) will delete all clips even if they
are protected.
NO:
Return to the previous screen.
4
Press the MENU button to return to the
thumbnail screen.
(Continued on the next page)
To Next Page
Loading...
