Menu
83
7
Repeat steps 2 - 5 to change any other
settings.
Press the MENU button to complete settings
and return to the normal screen.
Initializing the menu settings
The menu settings contain both the user file
settings and the scene file settings. You can
initialize them separately.
To initialize the user file (i.e. all the settings
other than the scene file settings)
Select INITIALIZE in LOAD/SAVE/INIT of the
USER FILE screen. The current menu settings of
user file will return to the factory settings.
To initialize the scene file
From the 6 scene files, select the one you want to
initialize with the scene dial. Then in the SCENE
FILE screen, LOAD/SAVE/INIT, select INITIALIZE.
The settings for only the selected scene file are
returned to the factory settings.
This does not effect the other scene files.
If you wish to initialize the user file and scene
files at the same time, the user file and all six
scene files can be restored to their factory
default settings by selecting YES for the MENU
INIT item on the OTHER FUNCTIONS screen.
•
To Next Page
Loading...
Need help?
General