Panasonic AG-HMC80PJ - Setting User Information

27
Chapter 1: Operations in AVCHD mode
4
Using the cursor button, select the item you
want to set with the left or right button, and
set the numerical value with the up or down
button.
You can reset the user information to nothing by
pressing RESET button.
Camera
AUDIO LEVEL
CH1 CH2
AUDIO SELECT AUDIO IN
CH1
AUTO
MAN
FRONT
REAR
CH2
PHOTO MCR
DVAVCHD
AUDIO SELECT
COUNTER RESET/ TC SET
AUDIO IN
CH1
AUTO
MAN
FRONT
REAR
CH2
AUTO
MANUAL
5
Select ENTER and press the ENTER button
when all items have been set.
5
Select ENTER and press the ENTER button
when all items have been set.
With this unit, the time code value is adjusted in
accordance with the format and frame rate. For
this reason, bear in mind that making a change in
the format or frame rate may result in discontinuity
from the last time code value of the previous
recording.
Recording format Time code adjustment
1080/24P
720/24P
Adjustable in 4-frame
increments
Setting user information
Setting user information allows you to store 8-digit
information in the hexadecimal format.
User information is automatically saved in the
memory and retained after you turn off the power.
1
Set the POWER switch to ON.
(Page 30 of Vol.1)
2
Select the UB PRESET item in the setting
menu RECORD SETUP screen, and then
press the ENTER button.
Menu operation (Page 40 of Vol.1)
Operations may also be performed
using buttons on the remote control that
correspond to those on the camera. For
details, see “Description of parts (Remote
control)”. (Page 23 of Vol.1)
3
Select YES and press the ENTER button.
•
•