- 202 -
The menu settings or [FILE SELECT] are reset to the default. (l 155)
* Settings for [CLOCK SET], [TIME ZONE] and [SYSTEM FREQ] will not be changed.
≥ Returning all settings to the default is not possible during Freeze Frame. (l 91)
Set the file number of the next MOV/MP4 and still picture to be saved to 0001.
≥ Folder number is updated and file number will start from 0001. (l 139)
≥ To reset the folder number, format the SD card, and then perform [NUMBER RESET].
You can view the software information (License) on a PC connected to this unit with a USB 3.0
cable.
≥ Set [USB MODE SELECT] to [DEVICE]. (l 201)
≥ Set [USB MODE] to [ON]. (l 201)
1 Touch [SOFTWARE INFO].
2 Connect this unit to a PC. (l 138)
≥ A message will be displayed when the connection is complete. On the PC, confirm
[LICENSE.TXT].
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
the LCD monitor on.
You can select the language on the screen display and the menu screen.
[INITIAL SET]
[ALL]: This is for initializing all menus.
*
[SCENE]: This is for initializing the setting of each scene number of [FILE
SELECT].
[NETWORK]: This is for initializing the [NETWORK SETUP] menu settings.
[NO]: This is for not performing initialization.
[NUMBER RESET]
[SOFTWARE INFO]
[LANGUAGE]
[English]/[Español]
[English]
AG-UX180
AG-UX180ED(DVQP1171ZA)_E.book 202 ページ ２０１６年１１月２８日 月曜日 午前１１時３２分
To Next Page
Loading...
