Panasonic AG-UX180 User Manual (English)

Other manuals for Panasonic AG-UX180

Handbook72 pages

Book72 pages

Questions and Answers:

D
dbartlettAug 19, 2025
Why my Panasonic AG-UX180 cannot be turned on or battery runs down quickly?
- J
  Jason RichardsAug 19, 2025
  If your Panasonic Camcorder cannot be turned on, does not stay on long enough, or the battery runs down quickly, try the following: * Charge the battery again to ensure it is sufficiently charged. * Keep in mind that in cold environments, the battery's usage time will be shorter. * The battery has a limited lifespan. If the operating time remains too short even after a full charge, the battery may be worn out and need replacement.
S
Sharon DavisAug 21, 2025
What to do if Panasonic AG-UX180 Camcorder is not detected by PC via USB?
- H
  hayden69Aug 21, 2025
  If your Panasonic Camcorder is not detected by your PC when connected via USB cable, try the following: * Re-insert the SD card into the unit, then reconnect the USB cable. * Try a different USB terminal on your PC. * Check the operating environment. * Restart your PC and turn the camcorder on again before reconnecting the USB cable.
T
Timothy SandersAug 23, 2025
What to do if Panasonic AG-UX180 displays “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
- D
  Dennis DavisAug 23, 2025
  If your Panasonic Camcorder displays the message “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN,” the unit has automatically detected an error. Try restarting the unit by turning it off and then on again. If the error message continues to appear even after restarting, it may require repair. Detach the power and consult the dealer from whom you purchased the unit.
N
Natalie GoodmanAug 26, 2025
What to do if my Panasonic AG-UX180 cannot be operated?
- M
  Michael ChambersAug 26, 2025
  If your Panasonic Camcorder cannot be operated even when it is turned on, or if it is not operating normally, try removing the battery or AC adapter. Wait for about 1 minute, then reconnect either the battery or the AC adapter. After another minute, turn the unit on again. Note that performing this action while the SD card is being accessed could damage the data on the media. If normal operation is still not restored, disconnect the power and consult the dealer from whom you purchased the unit.
D
Donald SmithAug 27, 2025
Why images cannot be seen on external monitor connected to Panasonic AG-UX180?
- W
  washingtonbethanyAug 27, 2025
  If your Panasonic Camcorder is connected to an external monitor but you cannot see any images, or the images appear squeezed horizontally, ensure you have selected the correct channel on your external monitor that corresponds to the input used for the connection, referring to the monitor's operating instructions. Also, adjust the setting on the camcorder according to the type of cable used to connect to the external monitor.
T
Tina JohnsonAug 30, 2025
Why does my Panasonic Camcorder stop recording?
- R
  Ronald RobertsonAug 30, 2025
  If your Panasonic Camcorder arbitrarily stops recording, ensure that you are using an SD card suitable for motion picture recording. The recordable time may have decreased because of data writing speed deterioration or repeated recording and deletion. Format the SD card using the unit.
P
paulhinesSep 1, 2025
Why is Panasonic AG-UX180 SD card not recognized in another device?
- V
  Vanessa HorneSep 1, 2025
  If your Panasonic Camcorder's SD card is not recognized when inserted into another device, verify that the device is compatible with the capacity or type of SD card (SDHC Memory Card/SDXC Memory Card) you are using. Consult the other device's operating instructions for compatibility details.
J
jenniferwilliamsSep 3, 2025
Why is SD card not recognized when inserted in Panasonic Camcorder?
- L
  Leroy CamachoSep 3, 2025
  If your Panasonic Camcorder's SD card is not recognized when inserted into the unit, it may be because the SD card was formatted on a PC. Use the camcorder to format SD cards.
W
William MaxwellSep 5, 2025
What to do if error message appears when USB Cable is disconnected from Panasonic AG-UX180 Camcorder?
- C
  Chad CarlsonSep 5, 2025
  If you disconnect the USB cable from your Panasonic Camcorder and an error message appears on your PC, disconnect the USB cable safely by double-clicking the icon in the task tray and following the on-screen instructions.
L
lopezkeithSep 7, 2025
Why Panasonic AG-UX180 scenes or still pictures cannot be played back?
- B
  Bridget MillerSep 7, 2025
  If you cannot play back scenes or still pictures on your Panasonic Camcorder, it may be because the thumbnails are displayed as . These scenes or still pictures cannot be played back. In most cases, is displayed for scenes recorded with another device or edited with editing software, or scenes with damaged data. Thumbnails of scenes recorded on other devices with different system frequencies are indicated with . You can play them back by changing the [SYSTEM FREQ] setting.

Panasonic AG-UX180 Specifications

General

Sensor type	MOS
Total megapixels	9.46 MP
Effective megapixels (movie)	8.79 MP
Digital zoom	30 x
Optical zoom	20 x
Image stabilizer	Yes
Focal length range	8.8 - 176 mm
Interchangeable lens	-
Image stabilizer type	Optical Image Stabilization (OIS)
Maximum aperture number	4.5
Minimum aperture number	2.8
Focal length (35mm film equivalent)	25.4 - 508 mm
Memory slots	2
Camcorder media type	Memory card
Disc types supported	No
Compatible memory cards	SDHC, SDXC
Internal storage capacity	- GB
Focus adjustment	Auto/Manual
Camera shutter speed	1/8000 s
Display diagonal	3.5 \
Display resolution (numeric)	1150000 pixels
Viewfinder type	Hybrid
Viewfinder resolution	2360000 pixels
Viewfinder screen size	0.39 \
Camcorder type	Shoulder camcorder
Product color	Black
Video resolutions	1280 x 720, 1920 x 1080, 3840 x 2160, 4096 x 2160 pixels
Video formats supported	MOV, MP4, AVCHD
Maximum video resolution	4096 x 2160 pixels
Maximum image resolution	- pixels
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) out	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Battery capacity	- mAh
Battery life (max)	- h
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 80 %