- 203 -
Network Setup
All default settings are indicated with underlined text.
Set up a login user account for the AG ROP application. (l 147)
Set the wireless LAN connection method. (l 150)
You can change or check the network setup, such as the IP address, subnet mask, and MAC
address for wireless LAN connections. (l 149)
A history of connections made to wireless access points are displayed. You can easily connect with
the same settings as used previously by selecting a connection record from History. (l 153)
You can change the [NETWORK SETUP] menu back to the default condition.
: [NETWORK SETUP] # desired setting
[USER ACCOUNT]
[SET]/[OFF]
[WIRELESS SETUP]
[DIRECT]/[SSID(SELECT)]/[SSID(MANUAL)]
[Wireless LAN setup]
[IP Address]/[Subnet Mask]/[Gateway]/[DHCP]/[MAC Address]
[CONNECTION HISTORY]
[NETWORK INITIAL SETTING]
MENU
AG-UX180ED(DVQP1171ZA)_E.book 203 ページ ２０１６年１１月２８日 月曜日 午前１１時３２分
To Next Page
Loading...
