Panasonic AG-UX180 - Viewfinder Adjustment

- 37 -
Viewfinder adjustment
≥ These settings will not affect the images actually recorded.
It adjusts the field of view to show the image on the viewfinder clearly.
1 Adjust the viewfinder to suit your vision so
that you can see the display images clearly.
≥ Be careful not to trap your fingers when moving the
viewfinder.
≥ The viewfinder can be lifted vertically up to
approximately 90o.
≥ Bring your eye close to the viewfinder to turn it on.
2 Adjust the focus by operating the eyepiece
corrector lever.
It adjusts brightness and color density of the viewfinder.
≥ Use the jog dial to change the settings. (l 113)
1 Select the menu. (l 41)
2 Rotate the jog dial to move the cursor to the
value display A.
≥ Push the jog dial to select the value display.
3 Rotate the jog dial to adjust the setting.
≥ Pushing the jog dial will set the value you have selected.
≥ You can select a value between s16 and r16.
4 Select [RETURN].
≥ Select [EXIT].
≥ This item is not available while the viewfinder is turned off.
≥ When [COLOR]/[COLOUR] is set to s16, images are displayed in black and white.
Adjusting the field of view
A Eyepiece corrector lever
[EVF SETTING]
: [DISP SETUP] # [EVF SETTING] # desired setting
[COLOR]/[COLOUR]: Color level of the viewfinder
[BRIGHTNESS]: Brightness of the viewfinder
[CONTRAST]: Contrast of the viewfinder

MENU

AG-UX180ED(DVQP1171ZA)_E.book 37 ページ ２０１６年１１月２８日 月曜日 午前１１時３２分