EasyManua.ls Logo

Panasonic AG-UX90EJ - User Manual

Panasonic AG-UX90EJ
206 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating Instructions
Memory Card Camera-Recorder
Model No. AG-UX90
Please read these instructions carefully before using this product, and save this manual for future
use.
DVQP1150ZA
ENGLISH
F1016YA0
EJ
EN ED
until
2016/10/28
AG-UX90EJ_DVQP1150ZA.book 1 ペー 2016年10月20日 木曜日 午前11時44

Table of Contents

Other manuals for Panasonic AG-UX90EJ

Questions and Answers

  • E
    Ethan WaltersAug 18, 2025
    What to do if Panasonic AG-UX90EJ Camcorder cannot be turned on or does not stay on long enough?
    • J
      Jacob MorrisonAug 18, 2025
      If your Panasonic Camcorder isn't turning on or staying on, try charging the battery again to ensure it's adequately charged. Remember that in cold environments, battery life decreases. Batteries also have a limited lifespan. If the operating time remains short even after a full charge, the battery is likely worn out and needs replacing.
  • A
    Alice YangAug 20, 2025
    What to do if Panasonic Camcorder is not detected by PC when connected by USB Cable?
    • V
      Victor MurphyAug 21, 2025
      If your Panasonic Camcorder isn't being detected by your PC via USB, re-insert the SD card into the unit and reconnect the USB cable. Try a different USB port on your PC. Also, try reconnecting the USB Cable after restarting both the PC and the camcorder.
  • E
    Erica HoustonAug 22, 2025
    What to do if Panasonic AG-UX90EJ displays 'ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.'?
    • Y
      Yvonne CookAug 23, 2025
      The Panasonic Camcorder has detected an error. You should restart the unit by turning it off and then on again. If the error message continues to appear after restarting, it indicates a problem that requires professional attention. Do not attempt to repair the camcorder yourself.
  • M
    masseybrandyAug 25, 2025
    What to do if Panasonic AG-UX90EJ Camcorder cannot be operated though it is turned on or does not operate normally?
    • C
      Christina JohnsonAug 26, 2025
      If your Panasonic Camcorder is on but not operating correctly, remove the battery or AC adapter, wait about a minute, and then reconnect it. Wait another minute before turning the unit back on. Note that performing this action while the SD card is being accessed could corrupt the data on it.
  • L
    lanenatalieAug 27, 2025
    Why is no audio recorded on my Panasonic Camcorder?
    • L
      Lisa Terrell DDSAug 27, 2025
      If your Panasonic Camcorder isn't recording audio, check if Variable Frame Rate Mode or Interval Recording is enabled. Audio is not recorded in Variable Frame Rate Mode or during Interval Recording.
  • M
    Michelle DavisAug 29, 2025
    Why does my Panasonic Camcorder arbitrarily stop recording?
    • R
      Robert GarciaAug 29, 2025
      Your Panasonic Camcorder might be stopping the recording because you are not using an SD card suitable for motion picture recording. The recordable time may also have shortened due to the deterioration of the data writing speed or repeated recording and deletion. Try formatting the SD card using the unit.
  • A
    Alec HopkinsSep 1, 2025
    How to fix Panasonic AG-UX90EJ Camcorder auto focus if it does not work?
    • S
      Steve BradySep 1, 2025
      If the Auto Focus function on your Panasonic Camcorder isn't working, and you're trying to record a scene that's difficult to focus on in Auto Focus Mode, switch to Manual Focus Mode and adjust the focus manually.
  • J
    Jack LeeSep 3, 2025
    Why does the color or brightness of the image change on Panasonic Camcorder, or why do I see horizontal bars?
    • J
      Jacob BakerSep 3, 2025
      The color or brightness changes, or horizontal bars appear on your Panasonic Camcorder when recording under fluorescent, mercury, or sodium light. This isn't a malfunction. Try recording images in Auto Shutter Mode or adjusting the shutter speed to 1/50, 1/60, or 1/100.
  • J
    jasonjordanSep 5, 2025
    What to do if Panasonic Camcorder SD card is not recognized?
    • C
      Christopher HansenSep 6, 2025
      If your Panasonic Camcorder isn't recognizing the SD card, and the card was formatted on a PC, it might not be compatible. Format the SD card using the camcorder itself.
  • S
    Sandra SantanaSep 8, 2025
    How to fix Panasonic AG-UX90EJ if scenes or still pictures cannot be deleted?
    • M
      Mark GarciaSep 8, 2025
      If you're unable to delete scenes or still pictures on your Panasonic Camcorder, first release the protect setting. If the scenes or still pictures are unnecessary, format the SD card to erase all data. Be aware that formatting will erase all data on the SD card, and it cannot be recovered. Back up any important data to a PC beforehand.

Panasonic AG-UX90EJ Specifications

General IconGeneral
Sensor TypeMOS
LensLeica Dicomar
Zoom20x optical zoom
MicrophoneBuilt-in stereo microphone
Wi-FiYes
TypeCamcorder
Image StabilizationHybrid O.I.S. (Optical Image Stabilizer)
Video Resolution3840 x 2160
Recording FormatsMOV, MP4, AVCHD
Maximum Recording Frame Rate60 fps
Audio InputXLR (2-channel)
ND Filter1/4, 1/16, 1/64
Display3.5-inch LCD
Viewfinder0.24-inch OLED
Video OutputHDMI
HDMI OutputYes
USBUSB 3.0
Storage MediaSD/SDHC/SDXC
BatteryLithium-ion

Related product manuals