- 167 -
Output Setup
Different menu items are displayed depending on whether this unit is in Recording Mode or
Playback Mode.
All default settings are indicated with underlined text.
This changes the way in which images are output to an external device. (l 119)
This enables/disables a function that controls recording performed with an external device
connected to the unit.
When [ON] is selected, you can control recording performed with this unit and an external device
using the recording start/stop button.
This function allows you to select how to display images with a 16:9 aspect ratio on an external
monitor with a 4:3 aspect ratio. (l 118)
≥ Set [RESOLUTION] to [DOWN CONV.]. (l 119)
Switches the output setting of time code information when this unit is connected to another device
(HDMI-SDI converter, etc.) with an HDMI cable.
≥ When performing remote recording with the USER button function [AUTO REC], select [ON].
(l 95)
≥ (In Playback Mode)
Touch the play mode select icon, and set this unit to Motion Picture Playback Mode.
(l 104)
: [OUTPUT SETUP] # desired setting
[RESOLUTION]
[SYSTEM]/[1080p]/[1080i]/[DOWN CONV.]
[REMOTE REC]
[ON]/[OFF]
[REMOTE REC LINK]
[ON]: Controls recording performed with this unit and an external device using the
recording start/stop button.
[OFF]: Controls recording performed with an external device using the USER button
function [AUTO REC]. (l 95)
[DOWN CONV.]
[SIDE CROP]/[LETTERBOX]/[SQUEEZE]
[HDMI TC OUTPUT]
[ON]/[OFF]
MENU
AG-UX90EJ_DVQP1150ZA.book 167 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
