Panasonic AG-UX90EJ - Setting the User Information

- 77 -
You can set the initial time code.
1 Select the menu.
2 Touch the item to set and change with / .
≥ It will be set to 00h00m00s00f when the RESET button is pressed.
≥ “h” is an abbreviation for hour, “m” for minute, “s” for second and “f” for frame.
3 Touch [EXIT] to complete the setting.
Setting the User Information
Eight digit hexadecimal alphanumeric can be entered and displayed as a memo information such as
dates, control numbers, etc., into the User Information.
UB 00 00 00 00
≥ This is displayed only when [REC MODE] is set to [AVCHD]. (l 147)
You can set the User Information.
≥ Set [REC MODE] to [AVCHD]. (l 147)
1 Select the menu.
2 Touch the item to set and change with / .
≥ You can use numbers from 0 to 9 and letters from A to F.
≥ It will be set to 00 00 00 00 when the RESET button is pressed.
3 Touch [EXIT] to complete the setting.
[TC PRESET]
: [RECORD SETUP] # [TC PRESET]
[UB PRESET]
: [RECORD SETUP] # [UB PRESET]
MENU
MENU
AG-UX90EJ_DVQP1150ZA.book 77 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分