- 84 -
≥ Register “Auto Tracking White Balance” to a USER button. (l 79)
The White Balance can be changed to ATW. (l 60)
≥ This function is not available when the White Balance mode is set to [ATW LOCK].
≥ Register “ATW Lock” to a USER button. (l 79)
This sets the White Balance mode to [ATW LOCK].(l 62)
≥ Register “Digital Zoom” to a USER button. (l 79)
Press USER button or touch USER button icon in the recording screen.
≥ When [DIGITAL ZOOM] is set to [k2], [k5] or [k10], Digital Zoom will be turned on/off each time
you press the button.
≥ When [DIGITAL ZOOM] is set to [TOGGLE], the zoom magnification will change each time you
press the button.
2k # 5k # 10k # Setting canceled
∫ To change the zoom magnification of Digital Zoom
The zoom magnification of Digital Zoom varies depending on the [DIGITAL ZOOM] setting.
≥ When using Digital Zoom, the larger you set the zoom magnification, the lower the picture quality
becomes.
≥ Digital Zoom is not possible in following cases:
j During Freeze Frame (l 86)
j When using Area Mode (l 87)
j In Variable Frame Rate Mode (l 91)
j During the Interval Recording (l 162)
≥ Digital zoom is canceled in following cases:
j If you turn the unit off
j If you press the THUMBNAIL button
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (l 122)
Auto Tracking White Balance
ATW Lock
Digital Zoom
: [SW SETUP] # [DIGITAL ZOOM] # desired setting
[k2]: Sets the zoom magnification to 2k.
[k5]: Sets the zoom magnification to 5k.
[k10]: Sets the zoom magnification to 10k.
[TOGGLE]: Changes the zoom magnification each time you press the applicable
USER button.
MENU
AG-UX90EJ_DVQP1150ZA.book 84 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
