Panasonic AG-UX90EJ - Before Connection

- 131 -
Before connection
Install the AG ROP application on the iPad.
≥ Download the AG ROP application from the App Store.
≥ Supported OS for the AG ROP application: iOS 7.1 or later (as of September 2016)
Attach a wireless module that support this unit to the USB HOST terminal of this unit.
≥ For details on wireless modules that support this unit, refer to the support desk at the following
website.
http://pro-av.panasonic.net
To connect an iPad to this unit via wireless LAN, the following information on this unit is required:
j User account name
j Password
j IP address
≥ If you set [DHCP] in [Wireless LAN setup] to [SERVER] and connect to a network, you are not
required to set the IP address.
≥ The user account and password can be set in [USER ACCOUNT].
≥ The IP address can be set in [Wireless LAN setup]. (l 133)
∫ Setting the user account name and password
1 Select the menu.
2 Touch [SET].
3 Select and touch an item that has not been registered.
4 Touch [Refresh]
≥ Touch [DELETE] to clear the selected user account.
5 Enter a user account name.
≥ Enter a maximum of 31 characters.
≥ After entering the title, touch [Enter].
iPad/AG ROP application
Wireless module
Settings to be made on this unit
: [NETWORK SETUP] # [USER ACCOUNT]
MENU
AG-UX90EJ_DVQP1150ZA.book 131 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分