Panasonic AG-UX90EJ - Backlight Compensation

- 82 -
*2 Not available during AG ROP application connection.
≥ The USER button function can also be set from the following menu item.
j [DRS] (l 145)
j [HISTOGRAM] (l 171)
j [EVF/LCD DETAIL] (l 53)
j [LOW LIGHT MODE] (l 149)
j [LEVEL GAUGE] (l 171)
j [FOCUS MACRO] (l 156)
j [FLASH BAND COMPENSATION] (l 150)
j [PRE-REC] (l 164)
j [VFR MODE] (l 163)
j [FAST ZOOM] (l 49)
j [i.ZOOM] (l 49)
j [AUTO IRIS LEVEL] (l 65)
j [ZEBRA] (l 157)
j [O.I.S.] (l 153)
j SCENE FILE: [LOAD/SAVE] (l 140)
j [USB MODE] (l 175)
j [AF AREA WIDTH] (l 55)
j [LCD/EVF OUTPUT] (l 32)
≥ Register “Focus Assist 1” to a USER button. (l 79)
You can set the Focus Assist. (l 56)
≥ Y
ou can set the Focus Assist method in [FOCUS ASSIST 1] in the [SW SETUP] menu.
≥ Register “Backlight Compensation” to a USER button. (l 79)
Switches to automatic iris control to compensate the backlight.
This makes the image brighter to prevent darkening of a backlit subject.
≥ appears when it is set.
≥ Canceling Backlight Compensation resets the iris mode to the previous setting.
≥ This item cannot be set during Freeze Frame. (l 86)
Item Icon Function
[USB MODE] [USB] USB Mode*
2
[AWB] [AWB] Auto White Balance
[SLOT SEL] [SlotSel] Slot Selection
[AF AREA] [AF Area] AF Area Width adjustment
[LCD/EVF OUTPUT] [LCD/EVF] LCD/EVF Output
[LOW GAIN] [LowGain] Low gain
[MID GAIN] [MidGain] Mid gain
[HIGH GAIN] [HighGain] High gain
[MENU] [MENU] Menu
Focus Assist 1
Backlight Compensation
AG-UX90EJ_DVQP1150ZA.book 82 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分