- 38 -
The recording images or playback images on the viewfinder can be selected between color/black
and white.
Select the menu. (l 41)
≥ If you adjust the [COLOR]/[COLOUR] setting in [EVF SETTING], [EVF COLOR]/[EVF COLOUR]
will be set to [ON].
It adjusts sensitivity of eye sensor.
1 Select the menu. (l 41)
2 Touch / to adjust settings.
≥ You can select a value between s4 and r4.
3 Touch [EXIT] to complete the setting.
≥ When the [LCD/EVF OUTPUT] is set to [LCD], this item cannot be set. (l 33)
Recording yourself
≥ Change the mode to Recording Mode. (l 32)
Rotate the LCD monitor towards the lens side.
≥ Displaying during the recording yourself can be
switched by setting [SELF SHOOT]. (l 199)
≥ Only some indications will appear on the screen when the [SELF SHOOT] is set to [MIRROR].
When appears, return the direction of the LCD monitor to normal position and check the
warning/alarm indication. (l 210)
≥ When the viewfinder is turned up, the LCD monitor is turned off.
[EVF COLOR]/[EVF COLOUR]
: [DISP SETUP] # [EVF COLOR]/[EVF COLOUR]# [ON] or [OFF]
[ON]: Displayed in color
[OFF]: Displayed in black and white
[EYE SENSOR]
: [DISP SETUP] # [EYE SENSOR]
MENU
AG-UX180ED(DVQP1171ZA)_E.book 38 ページ ２０１６年１１月２８日 月曜日 午前１１時３２分
To Next Page
Loading...
