- 211 -
CANNOT RECORD
- DATE CAPACITY IS
FULL.
This is displayed when you try to
record in excess of the maximum
number of scenes allowed for one
SD card.
≥ The operation will stop.
≥ Replace the SD card or
delete unnecessary
scenes.
Cannot record
- Playlist capacity is full.
INVALID This is displayed when the operation
is invalid.
≥ Before performing the
operation, wait until this
unit is ready for it.
ERROR
- UNABLE TO REPAIR
DATA.
This is displayed when the
management information cannot be
recovered.
≥ Check the SD card.
CANNOT USE SD CARD
IN VIDEO MODE,
CONTROL DATA ERROR.
≥ The operation will stop.
≥ Use another SD card to
perform recording.
CONTROL DATA ERROR
HAS BEEN DETECTED.
(SD CARD)
Defective management information
has been found.
≥ The management
information will be
automatically recovered
after this message is
displayed.
SUPER SLOW MODE NO
AUDIO RECORDING
Audio cannot be recorded if you
record using Super Slow Recording.
≥ To record audio, disable
Super Slow Recording.
VFR ON,
NO AUDIO RECORDING
Audio cannot be recorded if you
change the frame rate when using
Variable Frame Rate Mode.
≥ To record audio, disable
Variable Frame Rate
Mode.
CANNOT PLAY. This is displayed when an error in
the recording folder name or file
name has occurred, for example.
≥ Check the SD card.
CANNOT PLAY THIS
SCENE ON THIS MODEL.
The scene cannot be played back
because it was recorded with
another device.
≥ Play back the scene with
the device with which it
was recorded.
Display Description Behavior and cause
AG-UX180ED(DVQP1171ZA)_E.book 211 ページ ２０１６年１１月２８日 月曜日 午前１１時３２分
To Next Page
Loading...
