Panasonic AG-UX90 - User Sw

20
USER SW
The following table shows all functions that can be assigned to the USER buttons.
Menu item
Description
INHIBIT
The USER button is disabled (nothing is assigned).
FOCUS
ASSIST1,2
Turn ON/OFF the FOCUS ASSIST function. See 4-2. Understanding
Focus assist features (P. 36) for further details of this function.
BACKLIGHT
Switch auto iris mode to backlight mode. The backlight mode can prevent
underexposure when the lighting is illuminating from behind the subject.
SPOTLIGHT
Switch auto iris mode to Spotlight mode. The spotlight mode optimizes iris
control behavior when the contrast around the subject is high (example:
the subject is a spot light etc.)
BLACK FADE
Apply fade-in/out effect to video (black) and audio.
WHITE FADE
Apply fade-in/out effect to video (white) and audio.
ATW
Switch white balance mode to ATW (Auto Tracking White).
ATW LOCK
Fix the white balance aligned by ATW mode.
D.ZOOM
Use Digital Zoom (electronic image magnification) feature.
The magnification ratio can be chosen from x2, x5, x10, or can be toggled
through them.
REC CHECK
Plays last 2 seconds of the last recorded clip on the SD memory card.
LAST SCN DEL
Delete the last clip from the SD memory card.
DRS
Turn ON/OFF the dynamic range stretcher function. The DRS works to
minimize saturated blacks and overexposure. Its effect level can be
adjusted using the “DRS EFFECT” item of the SCENE FILE menu.
FRZ FRAME
Turn ON/OFF freeze frame feature. A still image is on the screen while this
feature is working.
SUPER GAIN
Turn ON/OFF the Super Gain control. The gain value to be boosted can
be set using the “SUPER GAIN” item of the SW SETUP menu.
[SUPER GAIN values that can be set] - 30dB or 36dB
AREA
The following features can be enabled by touching (pointing) the subjects
on the built-in LCD screen.
[Selectable items for AREA mode]
INH： No function is assigned.
FOCUS： Adjust the focus so that the pointed subject is in focus.
IRIS： Adjust the iris so that aperture level is appropriate for the pointed
subject.
Y GET： Indicate Y level of the pointed subject.
FOCUS/IRIS： Adjust both focus and iris for the pointed subject.
FOCUS/YGET： Adjust focus and indicate Y level of the pointed subject.
HISTOGRAM
(AG-UX90 only)
Display distribution of brightness of the image for a quick check of
exposure. The histogram chart consists of “brightness” on the horizontal
axis, and “frequency of appearance” on the vertical axis.
FOCUS TRANS
(AG-UX180 only)
Execute FOCUS TRANSITION (recalling focus position presets) function.
See 4-7. Understanding Focus transition (P. 41) for the details.
PUSH AUTO
Focus mode becomes AUTO while keep pressing the button in MANUAL
focus mode.
3. MENU settings