Panasonic AG-UX90 - Page 31

31
DISP SETUP <continued>
Menu item
Description
Value
(Factory default setting underlined)
OTHER DISPLAY
Show the information other
than the following.
USER buttons, Guide lines,
Safety zone, Center marker,
Date&time, Audio level meter,
Lens status, remaining time
(SD card and battery)
ON / OFF
POWER LCD
Boost up brightness of LCD
panel for outdoor use.
-1 / 0 / +1
LCD BACKLIGHT
(AG-UX180 only)
Set brightness of the built-in
LCD monitor.
HIGH / LOW
LCD SET
Adjust image characteristics of
the built-in LCD monitor.
COLOR, BRIGHTNESS, CONTRAST
EVF SETTING
Adjust image characteristics of
the viewfinder.
COLOR, BRIGHTNESS, CONTRAST
EYE SENSOR
(AG-UX180 only)
Set sensitivity of the proximity
sensor on the viewfinder.
-4 - -2 - +4
SELF SHOOT
Set display mode of the
built-in LCD monitor. Choose
“MIRROR” when performing
self-portrait recording. (Image
can be inverted horizontally.)
MIRROR / NORMAL
EVF COLOR
Turn OFF color image display
on the Viewfinder.
ON / OFF
EVF/LCD DETAIL
Turn ON edge enhancement
feature on the viewfinder and
the built-in LCD monitor for
easy focusing.
ON / OFF
EVF/LCD PEAK
LEVEL
Set enhancement level in the
EVF/LCD DETAIL setting.
-3 – 0 - +3
EVF/LCD PEAK
FREQ.
Set enhancement frequency in
the EVF/LCD DETAIL setting.
HIGH / LOW
3. MENU settings