120
Manipulating Clips with Thumbnails : Setting of Clip Meta Data
*1 The USER CLIP NAME recording method is
selectable. For details, refer to [
Selecting the USER
CLIP NAME recording method] (page 121).
*2 Be sure to enter TEXT when entering MEMO. It is
not possible to record only PERSON or OFFSET.
Note
AJ-HPX2000 only displays printable ASCII
characters.
The camera-recorder allows you to check the details of
read metadata.
1 Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2 Press the THUMBNAIL MENU button to select
METADATA
> PROPERTY from the thumbnail menu.
Then, the screen like this is displayed:
3 Use the cursor buttons to move the pointer. Then,
press the SET button. This allows you to view the
settings of the read metadata.
4 While viewing the settings for the metadata, use the
cursor buttons to move the pointer to the desired
option. Then, press the SET button. A software
keyboard screen is displayed, allowing you to modify
the setting.
Set O N / O F F i n M E TA DATA
> RECORD from the
thumbnail menu. The factory setting is OFF.
Checking and modifying read metadata
To set whether or not the uploaded metadata is
recorded
AJ-HPX2000P(VQT1D27-1)E.book 120 ページ ２００７年７月３０日 月曜日 午後１時３１分
To Next Page
Loading...
