164
Menu : Menu Description Tables
Note
The items indicated by are the setting items for PAINT
MENU SW(
) R/W in the <SD CARD R/W SELECT>
screen. The items without
are the setting items for
PAINT MENU LEVEL R/W.
Please refer to [
SD CARD R/W SELECT] (page 184) for
more information.
The ____ in the Adjustable Range column indicates the
preset mode.
MID SETTING
Items/
Data Saved
Adjustable
Range
Remarks
MASTER
GAIN
–3dB
:
6dB
:
30dB
Select the master gain from –3, 0, 3, 6,
9, 12, 15, 18, 21, 24, 27, or 30dB.
SCUF–
H.DTL LEVEL 00
:
08
:
63
For performing the horizontal detail
correction level setting.
SCUF–
V.DTL LEVEL 00
:
18
:
31
For performing the vertical detail
correction level setting.
SCUF–
DTL CORING 00
:
02
:
15
For performing the noise elimination
level setting for detail.
SCUF–
H.DTL FREQ.
00
:
18
:
31
For performing the horizontal detail
frequency selection.
SCUF–
LEVEL
DEPEND.
0
1
:
5
For setting the LEVEL DEPEND.
When the Y-detail is emphasized,
details of dark sections are
compressed.
If the numerical value is larger, details of
bright sections are also compressed.
SCUF–
MASTER
GAMMA
0.30
:
0.45
:
0.75
For setting the master gamma. (0.01
step)
SCUF–
BLACK
GAMMA
–3
:
OFF
:
+3
For setting the gamma curve for the
dark portion.
–
3 to
–
1:
The dark portion is compressed.
OFF:
Standard state
+1 to +3:
The dark portion is extended.
SCUF–
MATRIX
TA BL E
OFF
A
B
For selecting the color correction table
for the linear matrix.
SCUF–
COLOR
CORRECT
ON
OFF
For switching ON/OFF of the 12-axis
independent color correction.
SCUF–
HIGH SETTING
Items/
Data Saved
Adjustable
Range
Remarks
MASTER
GAIN
–3dB
:
12dB
:
30dB
Select the master gain from –3, 0, 3, 6,
9, 12, 15, 18, 21, 24, 27, or 30dB.
SCUF–
H.DTL LEVEL 00
:
06
:
63
For performing the horizontal detail
correction level setting.
SCUF–
V.DTL LEVEL 00
:
16
:
31
For performing the vertical detail
correction level setting.
SCUF–
DTL CORING 00
:
03
:
15
For performing the noise elimination
level setting for detail.
SCUF–
H.DTL FREQ.
00
:
18
:
31
For performing the horizontal detail
frequency selection.
SCUF–
LEVEL
DEPEND.
0
:
3
:
5
For setting the LEVEL DEPEND.
When the Y-detail is emphasized,
details of dark sections are
compressed.
If the numerical value is larger, details of
bright sections are also compressed.
SCUF–
MASTER
GAMMA
0.30
:
0.55
:
0.75
For setting the master gamma. (0.01
step)
SCUF–
BLACK
GAMMA
–3
:
OFF
:
+3
For setting the gamma curve for the
dark portion.
–
3 to
–
1:
The dark portion is compressed.
OFF:
Standard state
+1 to +3:
The dark portion is extended.
SCUF–
MATRIX
TA BL E
OFF
A
B
For selecting the color correction table
for the linear matrix.
SCUF–
COLOR
CORRECT
ON
OFF
For switching ON/OFF of the 12-axis
independent color correction.
SCUF–
AJ-HPX2000P(VQT1D27-1)E.book 164 ページ ２００７年７月３０日 月曜日 午後１時３１分
To Next Page
Loading...
