E– 12
ENGLISH
Mounting the Microphone
Follow the steps below to install the AJ-MC700P microphone kit (sold separately).
Viewfinder
MIC IN jack
Microphone holder
1.
Open the microphone holder.
2.
Mount the microphone.
3.
Plug the microphone connector cable into the MIC IN jack.
E– 11
Adjusting the Viewfinder
Detaching the Eyecup
If dust has adhered to the CRT screen or mirror, detach the eyecup and remove it.
<Note>
Do not wipe the mirror surface under any circumstances as it has been specially treated.
Dust which has adhered to the mirror should be blown away with a blower, etc.
Eyepiece
Lock ring
Alignment marks
1.
Turn the lock ring as far as possible in
the clockwise and counterclockwise
directions to line up the alignment
marks on the lock ring and viewfinder
barrel.
2.
Detach the eyecup.
Remounting the Eyecup
1. Line up the alignment marks on the lock ring and the viewfinder barrel and slide the
eyecup back into place.
2. Turn the lock ring clockwise as far as the position.
To Next Page
Loading...
