Panasonic AK-HRP1000G

19 CONNECT SETTING
CONNECT MODE CAM1(push)
“19 CONNECT SETTING” (see page 32)
CONNECT MODE CAM2 to CAM99
(push)
20 ROP IP SETTING
ROP IP ADDRESS Refer to the following section in the Operating Instructions.
“36 ROP IP SETTING”
ROP PORT
UPLOAD
ROP SUBNET MASK
UPLOAD
ROP DEFAULT GATEWAY
UPLOAD
MAC ADDRESS
21 CAMERA IP SETTING
CAM1 to CAM99 IP ADDRESS Refer to the following section in the Operating Instructions.
“37 CAMERA IP SETTING”
CAM1 to CAM99 PORT
CAM1 to CAM99 INF UPLOAD
22 AUTO IRIS SETTING
AUTO IRIS LEVEL
“AUTO IRIS LEVEL” (see page 33)
AUTO IRIS WINDOW
“AUTO IRIS WINDOW” (see page 33)
23 SWITCHER LINK
SWITCHER IP ADDRESS Refer to the following section in the Operating Instructions.
“44 SWITCHER LINK”
SWITCHER UDP PORT
INFO UPLOAD
SWITCHER LINK
TALLY RECEIVE
PREVIEW
TALLY ACTION MATERIAL
TALLY ACTION CAM No.
24 AW CONTROLLER LINK
RECEIVE PORT Refer to the following section in the Operating Instructions.
“45 AW CONTROLLER LINK”
INFO UPLOAD
AW CONT LINK
- 12 -
ROP Menu (during AJ-CX4000 Connection)