Panasonic AK-HRP1000G

ROP Menu (during AJ-CX4000 Connection)
ROP menu list
When an AJ-CX4000 Memory Card Camera-Recorder is connected, the ROP menu will be as follows. For setting values related to the cam-
era, refer to the Operating Instructions for the camera.
For details on menu operations, refer to the following sections in the Operating Instructions.
“Displaying menus”
“Basic menu operations”
NOTE
To perform menu operations, upgrade the version of the unit system to 4.82-00-0.00 or later.
The setting values of functions that are not supported are indicated as “－ ”.
01 SHUTTER SPEED
SHUTTER
“SHUTTER” (see page 13)
SPEED MODE
“SPEED MODE” (see page 13)
SYNC TYPE
“SYNC TYPE” (see page 13)
SPEED
“SPEED” (see page 13)
02 PEDESTAL
M.PED
“M.PED” (see page 14)
OFFSET
“OFFSET” (see page 14)
PED R
“PED R” (see page 14)
PED G
“PED G” (see page 14)
PED B
“PED B” (see page 14)
03 CHROMA
LEVEL %
“LEVEL %” (see page 15)
PHASE
“PHASE” (see page 15)
04 GAIN
GAIN
“GAIN” (see page 16)
AGC
“AGC” (see page 16)
AGC LIMIT
“AGC LIMIT” (see page 16)
AGC POINT
“AGC POINT” (see page 16)
05 COLOR TEMP
COLOR TEMP
“COLOR TEMP” (see page 17)
GAIN R
“GAIN R” (see page 17)
AXIS G
“AXIS G” (see page 17)
GAIN B
“GAIN B” (see page 17)
06 WHITE BALANCE
W.BAL SELECT
“W.BAL SELECT” (see page 18)
GAIN OFFSET
“GAIN OFFSET” (see page 18)
GAIN R
“GAIN R” (see page 18)
GAIN B
“GAIN B” (see page 18)
ATW SPEED
“ATW SPEED” (see page 18)
ATW TARGET R
“ATW TARGET R” (see page 18)
ATW TARGET B
“ATW TARGET B” (see page 18)
07 FLARE
FLARE R
“FLARE R” (see page 19)
FLARE G
“FLARE G” (see page 19)
FLARE B
“FLARE B” (see page 19)
SW
“SW” (see page 19)
- 8 -
ROP Menu (during AJ-CX4000 Connection)