Panasonic AK-HRP1000G

Connecting the Unit to AJ-CX4000 Cameras
Connections
Use a LAN cable to connect the <REMOTE> connector at the rear of the AJ-CX4000 to the <LAN> connector of the AK-
HRP1000G.
Set the connection setting to “LAN(AJ2)” in the [CONNECT SETTING] menu.
ヤヰワワユヤヵチヴユヵヵリワヨ
ヒチバチヒヒ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
ワヰワワヰワ
ヤモヮベヤモヮペ
ロモワ
ドモルビナ
ワヰワワヰワ
ワヰワワヰワワヰワ
ヤモヮフ
ワヰワ
ヤモヮヘ
ヤモヮビヤモヮピヤモヮヒ
ヤモヮブヤモヮプ
- 3 -
Connecting the Unit to AJ-CX4000 Cameras