To Next PageTo Next Page
Need help?Do you have a question about the Panasonic AW-RP150G and is the answer not in the manual?
General| Type | Remote Camera Controller |
|---|---|
| Control Protocol | IP, Serial |
| Camera Control | Yes |
| Joystick | Yes |
| Zoom rocker | Yes |
| Focus knob | Yes |
| SD card slot | No |
| PoE+ | Yes |
| Tally output | Yes |
| Preset memories | 100 |
| Supported Cameras | Panasonic PTZ cameras |
| User assignable buttons | Yes |
| Display | LCD |
| Compatible Models | AW-UE150, AW-HE130, AW-HE40 |
| Control Method | Ethernet, Serial |
| Power Supply | PoE+ |
| Operating Temperature | 0 °C to 40 °C |
| Storage Temperature | -20 to 60°C |
Illustrates serial and IP connection methods for the controller to cameras.
Instructions for connecting the controller via RS-422 to the camera.
Instructions for connecting via LAN, including IP configuration and PoE power.
Lists available menu items when connected to AW-HR140/AW-HE130 cameras.
Details sub-menus under PAINT, such as SCENE, SHUTTER, PED, CHROMA, GAIN, etc.
Lists sub-menus under SYSTEM, such as CAMERA, CONNECT SETTING, MANUAL IP SET.
Switches the shooting mode that matches the shooting situation.
Selects the shutter mode and speed for the camera.
Adjusts the pedestal of the R channel, B channel, and black level.
Sets the mode for super gain and adjusts image gain.
Sets the white balance mode, color temperature, and R/B gain.
Selects the type of gamma curve and adjusts the gamma correction level.
Sets the operating mode, compression level, and slope for gradation.
Adjusts contour correction, boost frequency, and noise reduction for detail.
Selects the type of color matrix and adjusts color for each axis.
Assigns image stabilization modes to user buttons.
