Panasonic AK-HRP1000G

17 SYSTEM CAM
ヴヺヴヵユヮチヤモヮ
ヒチバチピ
ョンユヲヶユワヤヺ
ヒビヨ
ピヨチヴュリ
ョヰンヮモヵ
ピヨ
ピヨチヴュリ
リハヴハヰヴュチヒビヨ
ヰヴュチピヨ
ロヷチモ
ビヒプパバブペハペフㄑ
ロヷチモ
ヰョョヰョョヰョョ
ブペハペフ
ヴヺヴヵユヮチヤモヮ
ビチバチピ
ヰヴュチヮヰワリヰヴュチラュヮリ
ヰヴュチリヱ
ヰヴュ
ヴヵモヵヶヴモヶュリヰ
ヨユワロヰヤレ
ヱラモヴユ
ヤヰワヵンヰロリワヱヶヵ
ヰワ
ヰョョ
ヰョョヤモヮヒ
ヴリヨワモロ
ヰョョ
ヰョョ
ヰョョ
ヰョョ
パ
ヵモロロヺ
ヴヺヴヵユヮチヤモヮ
ピチバチピ
ヵモロロヺ
ヤヰワヵチヮュ
ヴユロユヤヵ
Item Setting details
FORMAT Displays the system format.
FREQUENCY Indicates the frame frequency.
12G 3G SDI Selects the format to output 3G SDI signals when the video format of 12G SDI/OPTICAL is “1080/59.94p” or
“1080/50p”.
3G 3G SDI Selects the format to output 3G SDI signals when the video format of 3G SDI is “1080/59.94p” or “1080/50p”.
I.S. Sets the image stabilization to ON/OFF.
OSD 12G Selects ON/OFF for the display of the camera menu, status, and other information that is output from the
<12G SDI OUT> connectors.
OSD 3G Selects ON/OFF for the display of the camera menu, status, and other information that is output from the
<3G SDI OUT> connectors.
OSD MONI Selects ON/OFF for the display of the camera menu, status, and other information that is output from the
<MONITOR OUT> connectors.
OSD HDMI Selects ON/OFF for the display of the camera menu, status, and other information that is output from the
<HDMI> connector.
OSD IP Selects ON/OFF for the display of the camera menu, status, and other information that is output from the
<LAN LINK/ACT> connector.
OSD STATUS Sets ON/OFF for status display and error display during AWB and ABB execution.
AUDIO Sets the audio input to ON/OFF.
- 33 -
ROP Menu (during AW-UE100 connection)