Panasonic Arbitrator-CP - Officer Information Management; Register Officer Information; Delete Officer Information

(6) Officer Information
Register at the beginning of shift & delete at the end of shift
(A) Register the Officers information (At the beginning of shift)
(1) “Auto”: Plug USB memory (saved the officer information) to VPU.
(2) “Manual”: Plug USB memory to VPU and press “Load” button.
If 2 officers need to be loaded, plug 2 different USB memories to VPU.
(3) “List”: Press “Select” button in “Officer” by Control Panel menu.
(B) Delete the Officer information (At the end of shift)
“Manual”, “List”: Press “Delete” button in “Officer” by Control Panel menu.
[Manual]
[List]
[Top Menu]
-while REC stopped-
Register
Officers
Delete
Officers