Panasonic AW-RP60G - User Manual

Other manuals for Panasonic AW-RP60G

Questions and Answers:

Teresa Chavez DVMAug 4, 2025

What to do if Panasonic AW-RP60G Controller cannot operate a remote camera?

K
kerrjakeAug 4, 2025
If the Panasonic Controller cannot operate a remote camera, ensure that: * A power supply is properly connected to the remote camera. * The remote camera and the unit are properly connected. * The connection settings are correct. * The remote camera is not in standby mode (turn it on). * The remote camera is correctly selected. * The ENABLE button indicator is on. * User authentication has been set for the remote camera.

Pamela EvansAug 12, 2025

Why does the Panasonic AW-RP60G make the remote camera move in the opposite direction to the PAN/TILT lever?

L
Lauren WhiteAug 12, 2025
If the remote camera moves in the opposite direction to the PAN/TILT lever operation on the Panasonic Controller, check if: * The installation method setting is configured for the remote camera according to the actual installation state (right side up or upside down). * The movement direction is set properly on the unit.

Debra ChandlerAug 19, 2025

How to fix Panasonic Controller when it cannot turn the power of the unit on?

T
Theresa TorresAug 19, 2025
If the Panasonic Controller cannot be powered on: * Verify that external DC power is being supplied. * Ensure the DC plug of the external DC power supply is properly connected to the unit.

Devon HarringtonAug 27, 2025

Why does the Panasonic Controller make the remote camera move in the opposite direction to operation of the ZOOM button and FOCUS dial?

L
Larry SmithAug 27, 2025
If the remote camera moves in the opposite direction to the operation of the ZOOM button and FOCUS dial on the Panasonic Controller, check if the movement direction is set properly on the unit.

Panasonic AW-RP60G Specifications

General

Network Interface	Ethernet (10BASE-T / 100BASE-TX)
IP Control	Yes
Serial Control	Yes
Joystick	Yes
Zoom Control	Yes
Focus Control	Yes
Iris Control	Yes
Pan/Tilt Control	Yes
User Assignable Buttons	Yes
PoE	No
Display	LCD
Type	Remote Camera Controller
Operating Temperature	0 °C to 40 °C
Storage Temperature	-20 °C to 60 °C
Control Protocol	Visca
Supported Cameras	Panasonic PTZ cameras
Connectors	RS-422
Compatible Models	Panasonic PTZ cameras
Control Method	Remote control via Ethernet or serial
Power Supply	DC 12 V

Panasonic AW-RP60G - User Manual

Table of Contents

Other manuals for Panasonic AW-RP60G

Questions and Answers:

Panasonic AW-RP60G Specifications

Summary

Read This First! Safety and Precautions

EMC Compliance and Installation Precautions

Precautions for Safe Use

Handling, Environment, and Cleaning

Safety Warnings: Flames, Water, and Disposal

Installation Precautions

Power Supply Connection and Foreign Object Prevention

Installation Location Guidelines

Understanding the Units Controls

Control Panel Layout and Indicators

Control Panel Sections

Pan and Tilt Control Mechanisms

Camera Adjustment Controls

Focus, Zoom, and Iris Adjustment

Rear Panel Interface Connections

Connection Examples and Diagrams

IP Connection Examples

Network Connection Scenarios

IP Connections for Multiple Cameras

IP Connection for Single Camera

Serial Connection Scenarios

Serial Connection Examples

Basic Unit Operations

Powering On and Camera Selection

Adjusting Camera PanTilt, Zoom, Iris, and Focus

Powering Off the Unit

Managing Remote Camera Power

Turning Cameras On

Turning Remote Cameras Off

Turning Cameras Off

Camera Group Management

Selecting Camera Groups for Control

Selecting and Monitoring Cameras

Camera Selection Buttons and Status LEDs

Status Screen Navigation

Displaying and Interpreting Status Information

Menu System Navigation

Accessing and Displaying Menus

Navigating Menu Options

Operating Through the Menu System

Adjusting Menu Settings

Selecting and Modifying Menu Item Values

Unit Network Configuration

Setting the Units IP Address

Configuring the Subnet Mask

Network Settings Details

Setting the Default Gateway

Connecting Remote Cameras: Initial Setup

Configuring Camera Link Settings

Setting Connection Destination IP Addresses

Configuring Camera Connection Modes

Setting Connection Types (SerialIPNone)

Automatic IP Address Assignment

Automatic IP Setup Procedure

Executing Automatic IP Assignment

Adding Cameras with Auto IP Setting

Introducing New Cameras to Existing Setup

Managing Camera IP Settings

Adding Cameras with Keep IP Setting

Executing Auto IP Setting (Keep Mode)

Performing the Keep Auto IP Setting

Manual Camera Connection Settings

Manual IP Address and Port Configuration

Setting Camera User Account Information

Initializing Camera Connection Settings

Resetting IP Addresses and Connection Types

Menu System Overview

Menu Groups and Navigation

Menu: User Button Customization

Menu: Maintenance and System Settings

MAINTENANCE Options and RP Settings

Menu: Unit Initialization

RP INITIALIZE: Resetting Unit Settings

Preset Memory (PMEM) Operation