To Next PageTo Next PageWhy is Panasonic BL-C1 indicator light or blinking orange?
The indicator light may be orange or blinking because the Ethernet cable isn't properly connected. Ensure that the Ethernet cable is correctly connected. Also, the PC, Ethernet hub, or router might not be working. Verify that these components are functioning correctly.
What to do if Panasonic Security Camera indicator continues blinking orange (2-second interval)?
If the indicator continues blinking orange (2-second interval), it could be due to the router being turned off. Turn the router on and wait for the ADSL line to connect. Alternatively, an error might have occurred in UPnPTM port forwarding. In this case, set up the camera again in [Automatic Setup] using the Setup Program.
Why is Panasonic BL-C1 indicator not lighting up?
If the indicator on your Panasonic Security Camera is not lighting up, it could be because the indicator display is disabled. Check if the indicator control is disabled. Also, confirm that you are using the standard AC adapter.
Why is Panasonic Security Camera indicator continuing blinking green?
If the indicator continues blinking green, automatic setup might not be complete. Complete the setup following the instructions in Getting Started. It may also mean that the camera did not receive an IP address from the DHCP server.
General| Sensor type | CMOS |
|---|---|
| Digital zoom | 10 x |
| Dimensions (WxDxH) | 95 x 25 x 95 mm |
Weight and Dimensions| Weight | 100 g |
|---|
