Troubleshooting
4
The indicator
does not light
up.
• The indicator display is disabled.
Check if the indicator control is disabled (see page 97 of the
Operating Instructions on the CD-ROM).
• Confirm that the standard AC adaptor (Order No. PQLV206CEY
[for use in countries/areas other than the United Kingdom],
PQLV206EY [for use in the United Kingdom]) is being used.
The indicator
continues
blinking red.
• The camera may be malfunctioning.
If you cannot access the camera, the camera may be
malfunctioning. Call the authorized service center.
Problem Cause and Remedy
To Next Page
Loading...
