Panasonic CF-61 Series - (If the PD;CD Drive Tray will Not Open or Close ); Diagnostics Program; Diag61;62

36
Diagnostics Program (DIAG61/62)
Follow the procedure below to determine whether or not the various components of
the computer are functioning normally.
Insert the "Firstaid FD" into the floppy disk drive and restart the com-
puter.
Type the following:
1 Boot
2 Restore HDD to factory default
3 PD tools
62
A:\WINDOWS\COMMAND>
61
62
DIAG61
DIAG62
CAUTION
Do not enter the suspend or hibernation mode while the diagnostics program is runnning.
Before the diagnostics program starts, set "Power Saving" in setup program to except "Ad-
vanced".