Useful Information
12 At the conrmation message, click [YES].
l
13 When Ending process screen is displayed, click [OK] to turn off the computer.
14 Turn on the computer.
l
15 Perform the “First-time Operation”, starting from step 6, “Setup Windows” (è page 9).
NOTE
l
16 Start the Setup Utility and change the settings as necessary.
17 Perform Windows Update.
18
<Only for model with TPM> Clear TPM (è page 15).
n Using Recovery Disc
NOTE
l
Preparation
l
è Reference Manual
l
l
l
1 Connect the DVD drive to the USB port.
2 Start the Setup Utility.
A
B
C
l
l
3 Write down all of the contents of the Setup Utility and touch [Exit] and double-touch
[Load Default Values].
Enter
4 Check the [UEFI Boot] setting of the Setup Utility.
5 Set the Recovery Disc into the DVD drive.
6 Touch [Exit] and double-touch [Save Values and Reboot].
Enter
To Next Page
Loading...
